Здесь Вы можете заказать интересующие Вас курсы,
заполнив Заявку на обучение

Заявка на обучение

(CIERS2) Cisco Internetwork Expert Routing & Switching 2

Дни 5 дней
Дата курса
Цена:
235 348 руб.
Кол-во:
поделиться

Кому следует посетить

The primary audience for this course follows:

  • Network engineers that need be able to use an expert-level, problem-solving process including the Options Analysis method to support complex network technologies and topologies when both configuring and troubleshooting an internetwork

The secondary audience for this course follows:

  • Network designers that design and support complex network technologies and topologies

Сертификации

Этот курс является частью следующих программ сертификаций:

  • Cisco Certified Internetwork Expert Routing & Switching (CCIERS Routing & Switching)

Предварительные требования

To gain the prerequisite skills and knowledge, learners must have passed the Cisco CCIE Routing and Switching written exam.

Before taking Cisco 360 CCIE R&S Advanced Workshop 2, learners should be very familiar with the topics that are covered in CIERS1. It is also strongly recommended that learners perform two self-paced, graded assessment exams before attending this course. Learners should be able to demonstrate advanced-level competencies (knowledge and skills) that are equivalent to the following from both configuration and troubleshooting perspectives:

  • Perform expert-level tasks involving WAN technologies and switched Ethernet networks
  • Perform expert-level tasks involving Routing Information Protocol version 2 (RIPv2), Enhanced Interior Gateway Routing Protocol (EIGRP), and Open Shortest Path First (OSPF)
  • Perform expert-level tasks for route redistribution
  • Perform expert-level tasks for Border Gateway Protocol (BGP)
  • Perform expert-level tasks for IPv4 multicast
  • Perform expert-level tasks for IPv6 unicast and multicast connectivity
  • Perform expert-level tasks for router quality of service (QoS) using the Modular QoS CLI (MQC)

Several training courses are available through Cisco Learning Partners that are recommended to meet the prerequisites:

Cisco CCNP

  • Осуществление IP маршрутизации Cisco (2.0) (ROUTE)
  • Внедрение коммутируемых сетей Cisco (2.0) (SWITCH)
  • Поддержание в рабочем состоянии, а также поиск и устранение неполадок в IP сетях Cisco (2.0) (TSHOOT)

Beyond CCNP

  • Реализация QOS в сетях предприятия (версия 2.5) (QOS)
  • Настройка BGP на маршрутизаторах Cisco® 4.0 (BGP)
  • Развертывание протоколов маршрутизации в сетях сервис провайдеров, построенных на оборудовании компании Cisco (SPROUTE)
  • Развертывание расширенных функций маршрутизации в сетях сервис провайдеров, построенных на оборудовании компании Cisco (SPADVROUTE)

Цели курса

Upon completing this course, the learner will be able to meet these overall objectives:

  • Perform expert-level tasks involving both configuring and troubleshooting WAN technologies and switched Ethernet networks
  • Perform expert-level tasks involving both configuring and troubleshooting RIPv2, EIGRP, and OSPF
  • Perform expert-level tasks for both configuring and troubleshooting route redistribution
  • Perform expert-level tasks for both configuring and troubleshooting BGP
  • Perform expert-level tasks for both configuring and troubleshooting MPLS Layer 3 VPNs
  • Perform expert-level tasks for both configuring and troubleshooting IPv4 multicast
  • Perform expert-level tasks for both configuring and troubleshooting IPv6 unicast and multicast connectivity
  • Perform expert-level tasks for both configuring and troubleshooting router QoS using the MQC
  • Perform expert-level tasks for both configuring and troubleshooting Cisco Catalyst 3560 Series QoS
  • Perform expert-level tasks for both configuring and troubleshooting IP services

Содержание курса

Cisco 360 CCIE R&S Advanced Workshop 2 (CIERS2) v5.0 teaches learners how to use an expert-level, problem-solving process including the Options Analysis method to support complex network technologies and topologies. This course is part of a blended learning curriculum that supports expert-level preparation in routing and switching. This course has been updated to reflect the recent changes in the Cisco CCIE R&S lab that is implemented in the version 5 blueprint.

Программа курса

Module1: Formulating a Final-Phase CCIE Preparation Strategy

  • Differentiate an expert-level lab into well-defined subtopics
  • Perform mental simulations and the Options Analysis method
  • Test rigorously and verify Cisco IOS Software-based configurations
  • Formulate and apply applicable internetworking techniques

Module 2: Troubleshooting Cisco Networks

  • Describe an overview of the CCIE R&S troubleshooting section
  • Review the troubleshooting method that is outlined in the CCIE v5 blueprint
  • Describe an approach to forming a hands-on CCIE troubleshooting template for connectivity issues

360RSW-LAB-TA03 and 360RSW-LAB-CA03: Two Separate Sections for Troubleshooting and Configuration

Troubleshooting Section:

  • Incident 1: Layer 3—IP Protocol Independent Multicast (PIM) SSM
  • Incident 2: Layer 3—OSPF
  • Incident 3: Layer 2—Ethernet Switching
  • Incident 4: Layer 3—MP-BGP VPNv4 Redistribution
  • Incident 5: Layer 3—Route Targets Export and Import
  • Incident 6: Layer 3—IPv6 Routing
  • Incident 7: Layer 3—BGP
  • Incident 8: Security—PPP CHAP Authentication
  • Incident 9: Services—HSRP
  • Incident 10: Security—Zone-Based Firewall

Configuration Section:

  • Task 1: DMVPN and Serial Communications
  • Task 2: Switch Configuration
  • Task 3: IPv4 OSPF
  • Task 4: IPv4 EIGRP
  • Task 5: IPv4 RIP
  • Task 6: Reliable Static Routing and NAT
  • Task 7: Border Gateway Protocol
  • Task 8: IPv6 Routing
  • Task 9: Security
  • Task 10: QoS
  • Task 11: Address Administration
  • Task 12: HSRP Gateway Redundancy
  • Task 13: NTP Configuration
  • Task 14: Multicast Configuration
  • Task 15: SNMP

360RSW-LAB-TA04 and 360RSW-LAB-CA04: Two Separate Sections for Troubleshooting and Configuration

Troubleshooting Section:

  • Incident 1: Layer 3—IPSEC VPN
  • Incident 2: Layer 2—PPP
  • Incident 3: Layer 3—OSPF
  • Incident 4: Layer 3—EIGRP
  • Incident 5: Layer 3—RIP
  • Incident 6: Layer 3—BGP
  • Incident 7: Layer 3—PBR
  • Incident 8: Application—QoS RSVP
  • Incident 9: Services—GLBP
  • Incident 10: Security—SSH

Configuration Section:

  • Task 1: DMVPN and Serial Communications
  • Task 2: Switch Configuration
  • Task 3: IPv4 OSPF
  • Task 4: IPv4 EIGRP
  • Task 5: IPv4 RIP
  • Task 6: Border Gateway Protocol
  • Task 7: IPv6 Routing
  • Task 8: Security
  • Task 9: QoS
  • Task 10: NTP
  • Task 11: Cisco IOS Software Services
  • Task 12: Multicast
  • Task 13: Address Administration

360RSW-LAB-TA05 and 360RSW-LAB-CA05: Two Separate Sections for Troubleshooting and Configuration

Troubleshooting Section:

  • Incident 1: Layer 3—BGP
  • Incident 2: Layer 3—RIP
  • Incident 3: Layer 3—BGP Interior Gateway Protocol (IGP) Redistribution
  • Incident 4: Layer 3—OSPF
  • Incident 5: Layer 2 and Layer 3—EIGRP and Ethernet Switching
  • Incident 6: Layer 3—IPv6 Routing
  • Incident 7: Layer 3—Multicast
  • Incident 8: Services—Reliable Static Route
  • Incident 9: Services—TFTP
  • Incident 10: Management—EEM

Configuration Section

  • Task 1: DMVPN and Serial Communications
  • Task 2: Secure DMVPN
  • Task 3: Switch Configuration
  • Task 4: Cisco IOS Features
  • Task 5: IPv4 OSPF
  • Task 6: IPv4 EIGRP
  • Task 7: IPv4 RIP
  • Task 8: BGP
  • Task 9: MPLS/VPN Section
  • Task 10: IPv6 OSPFv3 Routing
  • Task 11: IPv6 EIGRP Routing
  • Task 12: IPv6 Connectivity
  • Task 13: QoS
  • Task 14: Gateway Redundancy
  • Task 15: Multicast

360RSW-LAB-TA06 and 360RSW-LAB-CA06: Two Separate Sections for Troubleshooting and Configuration

Troubleshooting Section:

  • Incident 1: Layer 2—PPP Multilink
  • Incident 2: Layer 3—OSPF
  • Incident 3: Layer 3—EIGRP
  • Incident 4: Layer 3—MPLS
  • Incident 5: Layer 3—BGP
  • Incident 6: Layer 3—IPv6
  • Incident 7: Layer 3—Multicast
  • Incident 8: Application—Accounting
  • Incident 9: Services—NTP
  • Incident 10: Security—BGP Security

Configuration Section:

  • Task 1: Serial and Static VTI Communications
  • Task 2: Switch Configuration
  • Task 3: VPN
  • Task 4: IPv4 OSPF
  • Task 5: IPv4 EIGRP
  • Task 6: IPv4 RIP
  • Task 7: IPv4 Redistribution
  • Task 8: Border Gateway Protocol
  • Task 9: Gateway Redundancy
  • Task 10: Multicast
  • Task 11: Traffic Administration
  • Task 12: Network Address Translation

360RSW-LAB-TA07 and 360RSW-LAB-CA07: Two Separate Sections for Troubleshooting and Configuration

Troubleshooting Section:

  • Incident 1: Layer 3—OSPF
  • Incident 2: Layer 3 – EIGRP
  • Incident 3: Layer 3— RIP
  • Incident 4: Layer 3—BGP
  • Incident 5: Layer 3—Universal IPv4 Connectivity
  • Incident 6: Layer 3—IPv6 Routing
  • Incident 7: Layer 3—Multicast
  • Incident 8: Services—IP SLA
  • Incident 9: Services—QoS and Embedded Packet Capture
  • Incident 10: Layer 2 and Layer 3—Backbone Connectivity

Configuration Section:

  • Task 1: IPsec VTI Communications
  • Task 2: Switch Configuration
  • Task 3: IPv4 OSPF
  • Task 4: IPv4 EIGRP
  • Task 5: IPv4 RIP
  • Task 6: IPv4 Redistribution
  • Task 7: Border Gateway Protocol
  • Task 8: IPv6
  • Task 9: Gateway Redundancy
  • Task 10: Multicast